Відео

So sooooo good, Fit It Now (aka, ArchiFix) your tutorial, thank you!!! One thing to share that may help others...on my 2021 Sprinter 170 extended high-top 4x4, the plastic casing around the emergency brake sits perfectly near the bottom of the front cab floor, without needing to trim a 1/2 off the bottom.. I trimmed the 1/2 off the bottom, only to discover on the newer Sprinters, it's a 1/2 trip off the top 90 degree arch of the INSIDE bit of plastic that needs to be trimmed with a jigsaw (or any other good cutting tool). There's now a lovely 1/2 lift off the bottom, no worries, as I will surely find a visually interesting way to hid this if or when putting thick floor mats or something like that. Wanted to share and hope others read this if watching off The Swivel Shop website. Thank you again for this perfect, step-by-step Scopema installation video.. Oh, and no airbag warning lights after reconnecting the battery!!!

Thank u

your good bro like a pro

Speed Queen is the only way to go for a washing machine. Worth every penny imo.

I have one of these and I agree with your review. I always tell people that ask my opinion after ownership and I simply tell them that it's a maintenance mower, not a no mow may 1 pass fix. Correct me if I'm wrong but I believe their marketing jargon is a bit misleading as it states a commercial grade deck, not a commercial grade mower. For anyone wondering if a new overpriced blade will help, I just got a mulch blade as that is solely what I do, and it seems a bit better but not like our old honda. There just isnt any lift so I still end up with flattened blades of grass but the grass does not hang in the deck area above the blade like your video showed. I'm on the fence of buying their high lift blade next. I also agree with the blade speed delay. Great video!

Awesome instructions! I plan on doing the same to my 2011 sprinter. Thanks for the great info! I'll keep checking back for the wiring diagram

thanks

How do u reduce the top speed ? I will have younger people driving it

Thanks for this. Long video or not, it was very helpful.

Thanks for vudeo! Got all done and found the screw bracket on right side was welded too far to left for the screw hole. Great. Incompetency in the work place?? Lol urrrr. And it came from John deere

I just got mine and it won’t go down how to fix that pls help

Brother, great idea. I tried it on my 2021 SR5 and couldn’t install it without having that one single bottom mesh stay loose. You mentioned in your video that you will show how you attached/zip tide it but didn’t get to it. Anyway you can make a video with it? Please and thank you!

Mine are tight drove in perfect still flew off

I tried doing this but its not giving me anything i even bought a scanner but it does not do anything no codes nothing

Good thing we aren't a democracy?

that was a tailgate extender with the mesh on the side of your truck I forget what they’re called but where you can leave your tailgate down so you can carry more of a load

All 3 are game changers for tough cleaning jobs. Never thought to use them together. Worked great, but it discolored the blade. Not a problem, but could cause problems with some surfaces. Always test first. Thanks 😊

Who the fuck thought that was a good idea

Great instructions thanks

Just picked one up yesterday. Last one I could find!

How long did all the imperfections such as the creases and sags take for them to work themselves out?

What a stupid design.

that’s a baddie

i have the Evo Classic and did exactly as you did, but the beeper is still beeping!

No link to the power probe in the description? 🤔

And he knew the EXACT reason I looked the video up😅! Thank you, Brah.

A thermal camera cannot accurately measure the temperature of high reflectivity/low emmisivity surfaces, because only emmitted radiation provides information about the objects temperature. The camera is calibrated for high emmisivity surfaces roughly 0.95, it cannot tell you the temperature of the foil. However the laws of thermodynamics telm us that the foil wil be in equilibrium with the rest of the roof and just as hot. You are measuring this completely wrong and misleading people.

Straight to the point!

Very strange how they put the pre mix bags of morter in the mixer instead of mixing portland with sand which is usually cheaper on a job this size

I have to get some of this Mothers Polish. Thank you for this Great Video .

Great review, thanks, I know how much effort it takes to produce one of these. You said you put a speed feed head on your Makita, do you have a link for that head? Thanks

WE HAVE BEEN LIED TO AND BAMBOOZLED!!,INTO BUYING HOUSES MADE OF STICKS FOR A LOAD OF MONEY!!,TORNADOS, FIRES AND HURRICANES DESTROYS!!,OH YES, TERMITES TOO!!

what is the small cap on the left top side of the motor?

nellie's

I don't think that's the Myers laundry detergent. I think that's probably nelly's ?

If I was the president of Griots car wax, I would hire you as a salesman. Because of this video, I bought a gallon from Amazon for $50. It works great! Thank you for taking the time to make this helpful video.

Hello! I’m hoping to get some help with our evolution golf cart. The touchscreen, lights and horn stopped working. Can’t find any info on how to fix it and our golf cart company won’t reply to any of our calls or emails.

Harbor freight has a hydraulic hand crimper for 69 bucks , amazon has one for 39, I've used the vice, or even a hammer in a pinch, but the hydraulic crimper is a great tool to have on hand.

실패한줄알았는데… 모니터 켜보니까 성공했어요!!!!! 진짜 디자인 최악 ㅠㅠㅠㅠㅠㅠ 패널분리는 정말 너무 리스크가 크네요 ㅠㅠㅠㅠ 어쨌든 감사합니다!!!!

Great tooltip.👍👍

This also works on any MotoElectric golf cart also. They have the identical console. you just pop off and disconnect the same wire. I put some electrical tape on the disconnected wire just to make sure it didn’t touch any other metal or connection points with it being loose under the console.

Life saver. Thank you sir.

Nice tip, my vise isnt mounted so i can even try in under tha Hood

K

Awesome, quick video! Thank you and well done!

Thank you. Great video, very informative. Finally have our gazebo up..what a nightmare. Going to use the tapcons today.😊

Our grandfathers didnt have power tools either and also assembled in USA doesnt mean made in the USA. Its probably made in china

Father in law gave me one the other day.. 1hp. Looking forward to figuring it out. There’s a piece connected to the bottom where the bit goes and I’m not sure how to use it lol. Millennials 😂

It's like having a smart midwest neighbor! Here in Los Angeles, home of the handy-less, your help is greatly appreciated.

I finally got a cable and found the software to download. followed all the instructions but cannot get a green CONNECT indicator - it just flashes red. Is Icon now requiring admin / engineer password to make changes? I noticed that have User Rights section under the OPTION heading now. Any help is much appreciated!